logo bottom.gif (2547 bytes) Uni-Crimp BNC

 

The New GEM Electronics Uni-Crimp BNC Connector line is ideal for the CCTV installer. The one piece design provides the ease of assembly of the Industry Standard Twist-On type connector, with the reliability of the Compression Seal connector, but at a very cost effective price.

 

  • One Piece Design Allows 20 Second Termination
  • 75 Ohm
  • Low Cost
  • Standard Cable Strip Dimensions & Crimp Tool

GEM Part Numbers:
301-75-2TP For RG59 Cable

301-75-10TP

 For RG59 Plenum Cable
301-75-5TP For RG6 Cable
301-75-510TP For RG6 Plenum Cable

 

Cable Assembly Procedures
 

1.) Trim cable as shown using strip tool part number
GST-1. Trim center conductor end at 45° angle.

2.) Fold braid back.
3.) Mark cable as shown.

4.) Push connector onto cable twisting connector clockwise and counter clockwise until connector end meets or passes mark on cable.

5.) Using Crimp Tool part number GET-301-UT and .320 Hex, crimp connector body area as shown.


button.gif (1458 bytes)

   logo bottom.gif (2547 bytes)

920A River Street
Kennedy Industrial Park
Windsor, CT 06095

Toll Free: 1-888-GEM-4195
Tel: 860-683-0392
Fax: 860-683-0396
Copyright © 1999 Gem Electronics
Last modified: May 12, 2004