 |
Surge Protectors |
The series of video surge protectors help prevent damage to sensitive electronic equipment due to differences in ground potential, power surges and area lightning strikes. Easily installed between the coax video cable and equipment connection jack, our surge protectors intercept repeated surges and ground them along a twisted conductive wire without any loss of signal quality. These products offer a combined surge handling capacity of 3,000 volts.
|
Surge Protector Part Numbers: SP-BNCPJ |
 |
|
Specifications |
|
|
DC Spark-Over Voltage |
90V typical at 100V/sec. |
|
Impulse Spark-Over Voltage |
700V at 1KV/usec. |
|
Surge Resistance |
10 Ohms typical |
|
Impulse Discharge Current |
10KA
at 8*20 usec. (Short Wave) |
|
Insertion Loss |
Less than 2dB |
|
Return Loss |
18 dB, 75 Ohms |
|
Connector |
SP-BNCPJ
- BNC Connector Male to Female |
|
Dimensions W x D x H |
78.6 x
29.4 x 24.4mm for F & BNC Connector |
