 |
Crimp-On
Procedure for BNC & TNC Connectors |
|
|
1)
Trim cable as shown.
|
|
2)
Slide crimp ferrule onto cable.
3) Fold braid back and complete trimming the cable as shown. Trim center conductor end at 45 degree angle.
|
|
|
4)
Push connector onto cable.
5) Fold braid back over crimp body. 6) Push crimp ferrule up over braid and crimp body.
|
|
|
7)
Using universal crimp tool P/N GET-301-UT, crimp ferrule to
connector using .320 hex. 8) Crimp cable support with appropriate hex:
.264 RG6PVC
.250 RG59PVC, RG6TFE .212 RG59TFE, RG58PVC |
