CD12

Catalog Detail

'N' Straight Plugs and Adapters
Plugs	Adapters
'N' Crimp Style (400-1)	Jack to Jack (400-11)	Plug to Plug (400-400)	Plug to Jack Angle (400-RA-427)

Male Plug	RG Cable Type	Wire Guage	Jacket O.D.	Hex Crimp Ferrule Size	Strip Tool	Crimp Tool
400-1	RG-58	18 AWG	.185-.205	.213	GST-4	GET-400-1
400-16	Proflex RG-450	18 AWG	.220-.250	.255	GST-4	GET-400-1
400-17	RG-8	16 AWG	.220-.250	.255	GST-6	GET-400-1
400-142	RG-142	18 AWG	.220-.250	.255	GST-4	GET-400-1
400-142T	RG-142-TFE	20 AWG	.200-220	.213	GST-4	GET-400-1
400-2	RG-59	22 AWG	.220-.250	.255	GST-4	GET-400-1
400-8	RG-8	13 AWG	.400-.410	.404	GST-6	GET-400-8
** 400-8/110	RG-8,213	10 AWG	.400-.410	.404	GST-6	GET-400-8
** 400-8/110 Solder Only

Cable Trimming and Assembly
I N S T R U C T I O N S			For Crimp Style 'N' Plugs 1. Taking care not to nick or cut the center conductor or braid, trim the cable as shown. Note: if there is a foil beneath the braid, leave this undisturbed. 2. Crimp contact to center conductor, making sure that contact is snug against the inner dielectric. 3. Slip crimp sleeve over cable. 4. Butt cable sub-assembly firmly into the connector housing. 5. Push crimp sleeve over braid, butting it firmly against the back of the connector housing, and crimp in the area indicated.
T O O L S	GST-4	GST-6	GET-400-1	GET-400-8