 |
SMB Connectors |
|
SMB-P196
|
SMB-AP196
|
SMB-J196 |
SMB-BKJ196
|
SMB-2HR
|
SMB-FMBKR
|
SMB-PCBJ
|
SMB-PCBAJ
|
SMB-PCBP
|
SMB-J-J
|
SMB-P-P
|
SMB-BKJ-J
|
Gem Part
Numbers
|
PLUG |
ANGLE PLUG |
JACK |
BULKHEAD JACK |
CABLE |
|
SMB-P196N |
SMB-AP196N |
SMB-J196N |
SMB-BKJ196N |
RG196 |
|
SMB-P196DBN |
SMB-AP196DBN |
SMB-J196DBN |
SMB-BKJ196DBN |
RD196 double braid |
|
SMB-P188N |
SMB-AP188N |
SMB-J188N |
SMB-BKJ188N |
RG188, 174, 316 |
|
SMB-P188DBN |
SMB-AP188DBN |
SMB-J188DBN |
SMB-BKJ188DBN |
RD188, 174, 316 double braid |
|
SMB-P58N |
SMB-AP58N |
SMB-J58N |
SMB-BKJ58N |
RG58, 141, 142 |
Product is provided as standard
nickel plated body and gold plated contacts.
For gold plated bodies delete the "N" at the end of the part number.
Gem Part Number Descriptions
|
GEM Part Number |
Description |
|
SMB-2HRN |
2 Hole Flange Mount Receptacle |
|
SMB-FMBKRN |
Front Mount Bulkhead Receptacle |
|
SMB-PCBJN |
Printed Circuit Board Mount Receptacle |
|
SMB-PCBAJN |
Right Angle Printed Circuit Board Mount Receptacle |
|
SMB-PCBPN |
Printed Circuit Board Mount Plug |
|
SMB-J/JN |
Adapter Jack/Jack |
|
SMB-P/PN |
Adapter Plug/Plug |
|
SMB-BKJ/JN |
Adapter Bulkhead Jack/Jack |
50 Ω SMB
Specifications
Electrical
|
Impedance |
50 Ω |
|
Frequency Range |
0-4 GHz with low reflection; usable to 10.0 GHz |
|
Voltage Rating for RG-188/U Cable |
335 volts at sea level and 85 volts at 70,000 feet |
|
Dielectric Withstanding Voltage |
RG-196: 750 VRMS; RG-188: 1,000 VRMS |
|
VSWR |
Straight
connector, RG-196/U: 1.30 + .04 f (GHz) |
|
Contact Resistance |
Center
contact: 6.0 mΩ initial, 8.0 after environmental; |
|
Insulation Resistance |
1,000 MΩ minimum |
|
Insertion Loss |
Straight
connector: 0.30 dB @ 1.5 GHz |
|
RF Leakage |
-55 dB minimum @ 2-3 GHz |
Mechanical
|
Mating |
Snap-on coupling per MIL-STD-348 |
|
Braid/Jacket Cable Affixment |
Hex crimp |
|
Center Conductor Cable Affixment |
Solder |
|
Contact Captivation |
All types unless noted otherwise |
|
Cable Retention |
Equal to breaking strength of cable employed |
|
Engagement Forces |
Engagement: 14 lbs maximum |
|
Connector Durability |
500 mating cycles minimum |
Material
|
Center Contact |
Female:
beryllium copper, gold-plated |
|
Outer Contact Plating |
Nickel or gold plating as indicated |
|
Body |
Brass per QQB-626, or zinc per ASTM B86-71 |
|
Body Plating |
Nickel or gold plating as indicated |
|
Insulator |
TFE |
|
Crimp Ferrule |
Annealed copper alloy |
Environmental
|
Temperature Range |
- 65°C to +165°C |
|
Thermal Shock |
MIL-STD-202 method 107, test condition B (except high temperatures @ 200°C |
|
Shock |
MIL-STD-202 method 202, method 13, snap-on, test condition B; 75 G's @ 6 milliseconds ½ sine |
|
Vibration |
MIL-STD-202 method 204, snap-on, test condition B; (15 G's) |
|
Corrosion |
MIL-STD-202 method 101, test condition B. 5% salt solution |
Note: These characteristics are typical but may not apply to all connectors.
